Micro-Miniature Solenoid Valves

Miniature General Service, Isolation, and Pinch valves for the reliable control of fluids and gases in medical equipment, analytical instrumentation, and industrial applications.     General Service These micro-miniature valves are ideal for applications where small size, long life, and low power consumption are a must. They are suitable for the control of non-corrosive liquids and gases and are available as in-line or manifold mount constructions.       Isolation Isolation valves incorporate a diaphragm that shields the fluid flowing through the valve from the internal solenoid components making them ideal for handling corrosive or high purity fluids. These valves are available with in-line porting or manifold constructions and in a wide variety of inert materials.     Pinch valves Pinch valves are designed to control the flow of fluid by locating soft tubing in a mechanism that “pinches” the tubing to block flow and releases to allow flow. Pinch valves are suitable for corrosive fluids, high purity applications, or fluids with particulate.    Options and Accessories ASCO Scientific offers a variety of accessories tailored specifically for our Miniature General Service, Isolation, and Pinch valves.

General Service Valves
These miniature valves are ideal for applications where small size, long life, and low power consumption are a must. They are suitable for the control of non-corrosive liquids and gases and are mount constructions.
Click on a series to learn more.
In-Line Porting
Series 188 -10 mm wide solenoid		-3 way, normally closed -M3 threaded ports -0.024" orifice -Low Power, 1.0 Watts -Manual operator -Pressure up to 115 psi
		Click here to view Series 188 Micro 10  Poppet Flash Presentation.
Series 407C - 1/2″ diameter solenoid		-2 ways and 3 ways -Bib connections for 1/16″ I.D. tubing -0.040″ Orifice -Low Power, 1.5 to 2.5 Watts -Long Life, Millions of cycles -Pressure up to 100 psi
Series AL - 3/4″ diameter solenoid		-2 ways and 3 ways -10-32 UNF ports -Up to 0.09″ orifice -Low Power, .65 to 2.0 Watts -Long Life, 100’s of millions of cycles -Pressure up to 110 psi
Manifold Mount
Series 188 -10 mm wide solenoid		-3 way, normally closed -M3 threaded ports -0.024" orifice -Low Power, 1.0 Watts -Manual operator -Pressure up to 115 psi
Series 407C - 1/2″ diameter solenoid		-2 ways and 3 ways -Bib connections for 1/16″ I.D. tubing -0.040″ Orifice -Low Power, 1.5 to 2.5 Watts -Long Life, millions of cycles
Series AM - 3/4″ diameter solenoid		-2 ways and 3 ways -Easy manifold mounting with 10-32 threaded stud -Up to 0.09″ orifice -Low Power, .65 to 2.0 Watts -Long Life, 100’s of millions of cycles -Pressure up to 110 psi

Isolation
Isolation valves incorporate a diaphram that shields the fluid flowing through the valve from the internal solenoid components making them ideal for handling corrosive or high purity fluids. These valves are available with in-line porting or manifold constructions and in a wide variety of inert materials.
Click on a series to learn more.
Rocker Isolation Valves
Series 067		2 way and 3 way 10mm wide manifold mount isolation valve with 13 microliter internal volume. PEEK body with FFKM, EPDM, or FKM elastomers with a variety of pressures and orifice sizes available.
		Click here for Flash Presentation.
Series 458		2-ways & 3-ways with easy flushing rocker design to prevent cross-contamination and no pumping. PSU or PEEK body with EPDM diaphragm. 1/4-28 flat bottom or 1/16" barb ports, 0.062" orifice.
Series 385		3-way, 16 mm wide manifold mount isolation valve with easy flushing rocker design to prevent cross-contamination and no pumping. PEEK body with FFKM, FKM, or EPDM elastomers. 0.062" orifice.
		Click here to view the Series 385 Flash Presentation.
Manifold Mount Isolation Valves
Series 067		2 way and 3 way 10mm wide manifold mount isolation valve with 13 microliter internal volume. PEEK body with FFKM, EPDM, or FKM elastomers with a variety of pressures and orifice sizes available.
		Click here for Flash Presentation.
Series 385		3-way, 16 mm wide manifold mount isolation valve with easy flushing rocker design to prevent cross-contamination and no pumping. PEEK body with FFKM, FKM, or EPDM elastomers. 0.062" orifice.
		Click here to view the Series 385 Flash Presentation.
Series 330		2, 3, 4 station PTFE mixing manifolds for solvent selection/gradient mixing. 1/4-28 flat bottom ports, 0.062" orifice.
Inert Isolation Valves
Series 190		2-way, normally closed PTFE construction for reliable on/off control. 1/4-28 flat bottom ports, 0.062" orifice.
Series 368		3-way, universal PTFE construction for selection or diversion of flow. 1/4-28 flat bottom ports, 0.062" orifice.
Series 462		3-way, universal with PEEK body and Kalrez elastomers to reduce leakage from particulate. 1/4-28 flat bottom ports, 0.062" orifice.
		Click here to view Series 462 Flash Presentation.
Series 364		2-way & 3-way, 1/8″ NPT, PTFE wetted components.
Series 330		2, 3, 4 station mixing manifolds for solvent selection/gradient mixing.
Series 067		2 way and 3 way 10mm wide manifold mount isolation valve with 13 microliter internal volume. PEEK body with FFKM, EPDM, or FKM elastomers with a variety of pressures and orifice sizes available.
		Click here for Flash Presentation.
Series 385		3-way, 16 mm wide manifold mount isolation valve with easy flushing rocker design to prevent cross-contamination and no pumping. PEEK body with FFKM, FKM, or EPDM elastomers. 0.062″ orifice.
		Click here to view the Series 385 Flash Presentation.
High Flow Isolation Valves
Series 364		2-way & 3-way, 1/8″ NPT, PTFE wetted components.
Series 8296		2-way, 1/8" & 1/4" NPT, 0.079" & 0.157" orifice, PEEK body with PTFE & FFKM seals.
		Click here to view 8296 Flash Presentation
Series 8396		3-way, 1/4" NPT, 0.157" orifice, PEEK body with PTFE & FFKM seals.
		Click here to view 8396 Flash Presentation